AWI Standards

Figure 5 – Compliance Testing Measurement

Figure 8 – Scribe Filler

Figure 9 – Scribe Moulding

Figure 10 – Scribe Allowance

Figure 15 – Frameless Construction Reveal

Figure 16 – Face Frame Construction Reveal

Figure 17 – Laboratory Application Reveal

Figure 18 – Grain Layout, Stile and Rail 1

Figure 19 – Grain Layout, Stile and Rail 2

Figure 21 – Grain Layout, Flush Panel, Custom Grade

Figure 23 – Overlap

Figure 24 – Chip-Out

Figure 25 – Over-Filing / Over-Machining

Figure 26 – Flushness Variations, Exposed and Semi-Exposed

Figure 27 – Flushness, Fixed Horizontal

Figure 28 – Radius, Beveled, or Square Edges

Figure 29 – Radius and Square Edges

Figure 30 – Gaps and Flushness, Casework

Figure 32 – Glass Clips

Figure 33 – Wrap-Around Hinges, Flush Overlay

Figure 34 – Wrap-Around Hinges, Reveal Overlay

Figure 35 – Reveal, Hinge Overlay

Figure 36 – Adjustable Shelves

Figure 41 – Closure, Laminate

Figure 42 – Closure, Filler

Figure 43 – Gaps, Reveal Overlay Frameless

Figure 44 – Gaps, Flush Overlay Frameless

Figure 45 – Gaps, Reveal Overlay Face Frame

Figure 46 – Gaps, Inset Face Frame

Figure 72 – Drawer Gaps

Figure 85 – Soffit, Fascia, and Filler

Figure 86 – Casework Surfaces

Figure 87 – Maximum Allowable Adjustable Shelf Lengths for MOE Values

Figure 103 – Scribed Corner Closure Panel

Figure 104 – Scribed Inside Corner Filler